When it comes to keeping your vehicle in top condition, every component plays a crucial role — and the knock sensor is no exception!
This unassuming little device detects abnormal vibrations in your engine, helping prevent any damaging knocking sound that can lead to severe performance issues. However, like any car part, the knock sensor can wear out over time, leading to the question: how much will it cost to replace it?
We’ll answer it for you by breaking down the factors that drive the knock sensor replacement cost.
Let’s go!
This Article Contains:
- How Much Does Knock Sensor Replacement Cost?
- Is it Worth Replacing the Knock Sensor?
- 5 Glaring Signs of Knock Sensor Issues
- How Long Do Knock Sensors Last?
- How to Diagnose a Faulty Knock Sensor?
- How to Avoid Knock Sensor Failure
How Much Does Knock Sensor Replacement Cost?
If you need to get a knock sensor replacement, here’s what you’ll likely have to pay:
A. Range
The average cost for swapping out a bad knock sensor ranges between $285 to $400. This replacement estimate covers:
- Part cost: $115 to $150
- Labor cost: $170 to $250
NOTE: This range excludes any additional taxes or fees you’ll need to pay based on your location.
B. Factors Affecting Cost
Apart from the part and labor costs, several other aspects of auto repair can drive the prices. These include:
- Vehicle make and model: Some vehicles, especially those with more complex engine designs (e.g., V6 or V8 engines), can make it harder to access the knock sensor, increasing labor costs. Likewise, high-end brands (like BMW, Audi, or Mercedes-Benz) may require specialized tools and more expensive replacement parts.
- Type of knock sensor: The kind of sensor your car features can also impact the final bill. The common types include:
- Single-wire vs. two-wire: Two-wire sensors are more expensive due to added complexity.
- Flat response vs. resonant: Flat response sensors cost more as they are more advanced and versatile.
- Piezoelectric vs. smart sensors: Smart sensors with built-in processors are significantly pricier than basic piezoelectric types.
- Dual knock sensors: Vehicles with V6 or V8 engines often require dual sensors, doubling the parts cost.
- OEM vs aftermarket parts: Original Equipment Manufacturer (OEM) sensors tend to be more expensive but guarantee compatibility, while aftermarket parts are usually cheaper and not always reliable.
- Related repairs: A faulty knock sensor can damage other ignition parts, such as the spark plugs, ignition coils, or the distributor, which could need replacement. This can quickly inflate your total bill.
- Recalibration charges: After replacing the knock sensor, the mechanic will need to reprogram or reset the Engine Control Module (ECM) to clear the error codes and recalibrate the engine’s timing. This may require specialized tools, adding to the cost.
Is it Worth Replacing the Knock Sensor?
Yes, replacing a bad knock sensor is definitely worth it, especially if you’re noticing symptoms like a knocking sound, poor fuel efficiency, or that dreaded check engine light. Ignoring the problem can lead to significant engine damage, which is far more expensive to repair than a simple sensor replacement.
By replacing it, you also help your car run smoother, more efficiently, and economically. So, the relatively low cost of the new knock sensor makes it an investment in long-term savings.
However, there are exceptions: If your vehicle is older and the cost of repairs outweighs its value, or if engine damage has already occurred, you might want to reconsider. In those cases, fixing just the sensor might not be enough, and the repairs could get costly.
5 Glaring Signs of Knock Sensor Issues
Here are some symptoms pointing to a knock sensor malfunction:
- Active check engine light: Any unusual engine vibrations or fuel detonation will trigger the check engine light on your dash. However, you’ll need a scan tool to check if the error code is related to the knock sensor.
- Engine knocking or pinging sounds: If the sensor isn’t working correctly, you may hear knocking or pinging noises coming from the engine block, especially when accelerating or carrying a heavy load.
- Poor acceleration or loss of engine power: A malfunctioning knock sensor may cause the vehicle to struggle during acceleration or lose engine power, as the ignition timing may be off. Some vehicles may also enter limp mode.
- Reduced fuel efficiency: Since the knock sensor helps the engine optimize combustion, a bad sensor can result in the engine burning more fuel than necessary.
- Failed emissions test: A faulty knock sensor can affect how the engine burns fuel, which may lead to higher emissions and a failed emissions test.
How Long Do Knock Sensors Last?
Knock sensors are generally durable and can last over 150,000 miles on most vehicles.
However, they can fail earlier due to the following factors:
- Physical damage: Impacts from debris or engine vibration due to detonation can harm the sensor and cause it to stop working.
- Wiring issues: Faulty wiring between the knock sensor and the Engine Control Module can disrupt its function.
- Electrical connector corrosion: Over time, the electrical connector between the sensor and wiring harness can corrode, causing it to malfunction.
- Improper adjustment: If the sensor isn’t calibrated or adjusted correctly, it may not work as intended.
How to Diagnose a Faulty Knock Sensor?
While the actual replacement may be simple, the diagnosis is the tricky part. That’s why it’s best to let an experienced auto repair mechanic do this job for you.
Still, if you wish to know how it’s done, here‘s how a mechanic will go about it:
- Connect a diagnostic tool to the vehicle’s OBD-II port to check for related error codes (e.g., P0325.)
- Visually inspect the knock sensor and its wiring for any damage, corrosion, or loose connections.
- Use a multimeter to check the sensor’s voltage signal to ensure it’s within the correct range.
- Drive the vehicle to listen for any engine knock and see if the knock sensor adjusts the engine timing.
- Use advanced diagnostic tools to monitor how the control module responds to knock sensor input and adjusts the ignition timing.
- If the sensor isn’t sending accurate signals or the control module isn’t adjusting timing properly, they’ll perform a knock sensor replacement.
How to Avoid Knock Sensor Failure
Follow these steps to prevent any knock sensor issues in the future:
- Avoid low-octane fuel, as it increases the chances of detonation or engine knock.
- Check the knock sensor’s wiring and connectors for damage or corrosion during routine maintenance.
- Keep your cooling system in good condition to prevent overheating, which can damage the knock sensor.
- Avoid aggressive driving, which can cause excess engine vibration and wear on the sensor.
- Get timely oil and air filter changes as well as tune-ups to prevent engine misfires or knocking.
Knock Down Sensor Problems with AutoNation Mobile Service
While the cost of a new knock sensor is an important consideration, the long-term benefits of timely replacement far outweigh the expense.
If you’re looking for a hassle-free replacement, consider hiring a mechanic from AutoNation Mobile Service. With the convenience of on-site mobile repairs, you can have a bad sensor replaced right from your driveway.
Don’t wait for your car problem to escalate — contact us for an accurate estimate and keep your ignition running smoothly!