A PCV (Positive Crankcase Ventilation) valve might be small, but it’s crucial for keeping your engine healthy and your emissions in check. If it gets clogged or worn out, you might notice rough idling, an oil leak, or even the dreaded Check Engine Light.
Luckily, replacing a PCV valve is budget-friendly, though costs can vary depending on your car’s make, parts, and labor.
Keep reading to discover the PCV valve replacement cost and the factors affecting your bill. We’ll also list the steps involved in testing and replacing the valve so you know what to expect.
This Article Contains:
- How Much Does a PCV Valve Replacement Cost?
- Is It Worth Replacing the PCV Valve?
- 11 Critical Signs You Need a PCV Valve Replacement
- How Long Does a PCV Valve Last?
- How to Test and Replace a Bad PCV Valve
- Can You Clean the PCV Valve Instead of Replacing It?
How Much Does a PCV Valve Replacement Cost?
Here’s what you can expect to pay for a PCV valve replacement:
A. Range
Swapping a faulty PCV valve for a new one typically costs between $80 and $220. This range covers:
- Part cost: $20 to $50
- Labor cost: $60 to $170
B. Factors Affecting Cost
Besides parts and labor, several other factors can influence your final bill, including:
- Vehicle type: PCV valve replacement is costlier for luxury and sports cars with complex engines than for standard sedans or compact cars.
- PCV valve accessibility: Your labor costs will be low if the valve is easily accessible, such as when it’s mounted on the valve cover. However, if it’s located under the intake manifold or integrated with other engine components, the labor costs can increase.
- Part quality: Original Equipment Manufacturer (OEM) parts usually cost more, but they’re built to last longer and are more reliable than aftermarket alternatives.
- Repair shop location: Auto repair shops in expensive urban areas and big cities have higher labor charges than those in rural areas and smaller towns.
- Related repairs: Replacing the PCV valve might also involve fixing issues like cracked hoses, leaking valve cover gaskets, or worn spark plugs. If there’s oil buildup, the mechanic may also recommend cleaning the intake manifold. For reference, a PCV hose replacement can add $105 to $130 to your bill, while replacing spark plugs could cost an additional $50 to $750.
Is It Worth Replacing the PCV Valve?
Yes!
The Positive Crankcase Ventilation valve helps reduce emissions by venting gases from the crankcase. These gases, called blow-by, are sent to the intake manifold and burned off in the combustion chamber.
If the PCV valve gets clogged or damaged, the gases can’t escape properly, leading to increased pressure and moisture buildup that can cause rust or damage to engine parts.
A clogged PCV valve can either get stuck open or closed:
- Stuck open: This causes a vacuum leak, leading to rough idling or engine surges. It may be caused by a leaking hose.
- Stuck closed: This creates excess pressure in the engine crankcase, causing oil leaks.
To avoid these problems, get the PCV valve replaced as soon as you notice any issues.
11 Critical Signs You Need a PCV Valve Replacement
In case of PCV valve failure, you’ll notice the following signs:
- Engine oil leak
- Illuminated Check Engine Light (codes P0171 and P0174 could be activated)
- Hard starting
- Gray, blue, or white smoke from the exhaust pipe
- Low whining or whistling sounds when driving
- Engine surges (due to an increase in internal engine pressure)
- Rough idle
- Poor fuel economy
- Increased oil consumption
- Oil in the air filter housing
- Sludge buildup in the engine
How Long Does a PCV Valve Last?
A PCV valve typically lasts between 20,000 and 50,000 miles. However, it can fail early due to:
- Wear and tear from regular use
- Lack of routine maintenance
- Carbon deposit buildup that disrupts airflow
- Oil sludge buildup that causes your valve to stick or become clogged
- External debris, like dirt and dust, entering the PCV system due to a bad air filter
- Installing low-quality parts that fail early and compromise system performance
How to Test and Replace a Bad PCV Valve
Before replacing the entire PCV valve, it’s advisable to test whether the valve itself is the issue or if other components like seals or hoses are causing problems. Since this involves multiple checks, it’s best left to a trusted mechanic.
Here’s how they’ll test your PCV valve:
- They’ll start by checking for cracks or wear in the rubber grommets or O-rings around the valve. If they spot any damaged seals, they’ll replace them to prevent leaks.
- Hoses can become oil-soaked when oil leaks from nearby worn seals, loose connections, or a faulty PCV valve, seep into the hose material. The mechanic will inspect the hoses for signs of hardening, cracks, or swelling and replace them if needed.
- If the grommets and hoses are intact, they’ll remove the valve. A functional valve should rattle when shaken. If it doesn’t, it may be clogged and require replacement.
- Next, they’ll look for milky or oily residue on the valve, which indicates moisture buildup. If present, the valve will likely need replacement.
It can take a skilled mechanic 1 to 2 hours to complete the replacement.
Here’s how they would do it:
- Remove the old valve: They’ll use pliers to gently remove the hose connected to the valve. Next, depending on the valve’s mounting style, they’ll remove the PCV valve using pliers or a wrench. If it’s secured by a rubber grommet, they’ll simply pull it out by hand.
- Install the new valve: The mechanic will screw in the new valve by hand or push it into the rubber grommet. For threaded valves, the mechanic will use a wrench or ratchet to tighten the valve securely but avoid overtightening. Then, they’ll reattach the hose.
- Final testing: They’ll clear any error codes using an OBD-2 scanner and check if all issues have been resolved.
Can You Clean the PCV Valve Instead of Replacing It?
Yes, you can clean the PCV valve if it’s dirty but still in good condition. However, if it’s severely damaged or stuck (open or closed), replacement is usually a better option.
To clean a dirty PCV valve, remove it from the valve cover and soak it in carburetor cleaner to dissolve any buildup. You should also ensure it’s free from deposits or discoloration.
If cleaning doesn’t resolve the problem, replacing the valve is necessary to prevent further engine damage.
Trust AutoNation Mobile Service for PCV Valve Replacement
Replacing a faulty PCV valve is crucial for maintaining smooth engine performance and preventing costly engine repairs.
If you’re facing a PCV valve issue and can’t make it to an auto repair shop due to engine issues, call AutoNation Mobile Service.
Our expert mechanics will replace the failing PCV valve right from your driveway. All our repairs are backed with a 12-month, 12,000-mile warranty, and we offer after-hours customer support.
Schedule a service with us today to safeguard your vehicle from severe damage.